Engineer Or Scientist

Job summary

You will serve as an ENGINEER OR SCIENTIST in the Corrosion Control Technologies Department of CARDEROCK DIV NS. The Secretary of Defense has ordered a department-wide hiring freeze subject to certain limited exceptions. This position is subject to the DoD hiring freeze. Offers of employment related to this vacancy announcement will not be executed until the position has an approved exemption.

Major duties

You will serve as the corrosion team lead, responsible for guiding the development of corrosion control technologies that have application for marine and expeditionary vessels and vehicles for the US Navy and Marine Corp. You will develop and lead a team of engineers, scientists, and technicians that executes scientific and engineering projects to improve corrosion control for Navy and Marine Corp assets. You will determine the vision and outlook for corrosion science and corrosion control and develop and execute the plan to attain the vision. You will be required to apply knowledge of engineering theories, concepts, and procedures related to corrosion and materials science. You will, as lead, have full responsibility for corrosion applied research, testing and evaluation of corrosion related materials, and equipment and systems. You will be responsible for experimental development of instrumentation, techniques, processes, materials and equipment; and/or In-service engineering functions for assigned materials, systems or equipment. You will identify the scope of the investigation, analysis and design criteria, and defines the engineering requirements of the work effort. You will perform analyses on large and complicated projects requiring advanced knowledge of corrosion and materials science. You will provide technical expertise and authoritative advice concerning their technical specialty in corrosion science and control to higher echelons, program offices, and other government agencies.

Qualification

In addition to the basic education requirements, your resume must demonstrate at least one year of specialized experience at or equivalent to the ND-04 (GS-12/13 equivalency) grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: as a professional Engineer or Scientist analyzing or assessing corrosion and materials to provide corrosion measurement data analysis and define procedures or processing techniques for support of corrosion control and operational readiness. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/materials-engineering-series-0806/ https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/mechanical-engineering-series-0830/ https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/chemical-engineering-series-0893/ https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1300/chemistry-series-1320/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: PROFESSIONAL ENGINEERING SERIES 08XX: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. CHEMISTRY SERIES, 1320 Basic Requirements: Degree: physical sciences, life sciences, or engineering that included 30 semester hours in chemistry, supplemented by course work in mathematics through differential and integral calculus, and at least 6 semester hours of physics. OR Combination of education and experience -- course work equivalent to a major as shown in A above, including at least 30 semester hours in chemistry, supplemented by mathematics through differential and integral calculus, and at least 6 semester hours of physics, plus appropriate experience or additional education. OCEANOGRAPHY SERIES 1360 Basic Requirements: A. Degree: major study of at least 24 semester hours in oceanography or a related discipline such as physics, meteorology, geophysics, mathematics, chemistry, engineering, geology, or biology, plus 20 additional semester hours in any combination of oceanography, physics, geophysics, chemistry, mathematics, meteorology, computer science, and engineering sciences. or B. Combination of education and experience -- course work as shown in A above, plus appropriate experience or additional education. Applicants who qualify on the basis of major study in biology or geology must have had at least 6 semester hours in the major directly concerned with marine science or 6 semester hours in oceanography; applicants who qualify on the basis of other physical sciences or engineering must have had differential and integral calculus and at least 6 semester hours in physics.

Evaluations

When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and application package, along with your supporting documentation to determine your ability to demonstrate the following competencies: MATERIALS ENGINEERING DEVELOPING OTHERS ENGINEERING PROJECT MANAGEMENT WRITTEN COMMUNICATION PARTNERING This recruitment will utilize the following technical assessment tools: Structured Resume Review and Structured Interview. You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation. If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment. All eligibility and qualifications requirements must be met by the closing date of this announcement.