Aircraft Pneudraulic Systems Mechanic

Job summary

Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to to test, troubleshoot, repair and modify aircraft fuel distribution systems, repair leaks of external/integrated tanks, and provide training to reservists in the accomplishment of tasks set forth therein.

Major duties

Receives work document(s) or oral instructions regarding problem with aircraft fuel system. Troubleshoots integral fuel tanks, using leak path analysis and other test procedures such as pressure checks, vacuum checks, dye injection checks, helium and argon gas checks, etc., to determine the source of fuel leaks. Troubleshoots fuel cells to determine location of leaks. After defueling, removes tank access door and conducts purging operation using approved equipment. Accomplishes modifications and prepares components for storage or shipment. Prepares effective training plans to maximize Reserve training. In performing duties uses a variety of common hand tools, combustible and toxic gas indicators, torque wrenches, leak detectors, pressure gauges, manometers, powered tools such as drills and pneumatic wrenches.

Qualification

QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-8200 Fluid Systems Maintenance Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is ability to do the work of an Aircraft Pneudraulic Systems Mechanic without more than normal supervision; WG-8268-10 Aircraft Pneudraulic Systems Mechanic, WG-8200 Fluid Systems Maintenance Family. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Ability to follow oral and written instructions. Skill in the use of standard hand and power tools of the trade. Ability to read and interpret a variety of technical data. 2. Ability to install aircraft pneudraulic systems, equipment or accessories. Comprehensive knowledge of operation, capabilities and limitations of aircraft pneudraulic systems. 3. Ability to use a variety of test and measurement equipment. Ability to test complete pneudraulic systems. 4. Ability to overhaul, repair or fabricate aircraft pneudraulic equipment. Ability to calibrate aircraft pneudraulic equipment. 5. Ability to troubleshoot aircraft pneudraulic equipment of moderate complexity. Knowledge of safety and security requirements as outlined in applicable standards, regulations and technical orders. 6. Knowledge of tool, equipment, and materials accounting and security. Knowledge of USAF Technical Order Program and its procedures. Ability to clean work area and/or job site upon completion of work. OTHER SIGNIFICANT FACTS: This is an Air Reserve Technician (ART) enlisted position. The incumbent is required to meet and maintain Air Force Reserve requirements. Work schedule will be aligned to allow the incumbent to fully participate in unit training assemblies. The incumbent's regular assignments are primarily ART duties; however, the incumbent may also be assigned non-ART duties, generally not to exceed 30 percent of total responsibilities. The incumbent must obtain and retain the appropriate security clearance level designated for the position. This is a Testing Designated Position (TDP). The employee is subject to random drug testing. The incumbent is subject to pre-employment drug testing and participation in random drug testing as a condition of employment. Drug Test requirement was modified with AFI 90-508, Air Force Civilian Drug Demand Reduction Program, 28 August 2014; Certified Current 18 December 2015 which supersedes AFI 44-107, 7 April 2010. Positions covered by this SPD must be reviewed for proper "Testing Designated Position (TDP)" coding to comply with the AF Civilian Drug Demand Reduction Program (AFI 90-508). Drug testing is a condition of employment. The incumbent may be required to fly in military and/or commercial aircraft to perform temporary duty assignments (TDY) away from the normal duty station. The incumbent may be required to work overtime to meet workload demands. Performs other duties as assigned. FUNCTIONAL REQUIREMENTS: Heavy lifting (45-79 pounds). Moderate lifting (15-44 lbs). Light lifting (under 15 lbs). Moderate carrying (15-44 lbs). Light carrying (under 15 lbs). Hours of straight pulling are 1 hour/week. Hours of pulling hand over hand are 1 hour/week. Hours of pushing are 1 hour/week. Reaching above shoulder. Use of fingers. Both hands required. Hours of walking are 4 hours/week. Hours of standing are 10 hours/week. Hours of crawling are 1 hour/week. Hours of kneeling are 1 hour/week. Hours of repeated bending are 3 hours/week. Climbing, use of legs and arms. Both legs required. Operation of crane, truck, tractor, or motor vehicle. Ability for rapid mental and muscular coordination simultaneously. Near vision correctable at 13 inches to 16 inches to Jaeger 1 to 4. Far vision correctable in one eye to 20/20 and 20/40 in the other. Both eyes required. Depth perception. Ability to distinguish basic colors. Hearing (without aid). Must be free from claustrophobia. ENVIRONMENTAL FACTORS: Outside. Outside and inside (other than normal commuting). Excessive heat. Excessive cold. Excessive humidity. Excessive dampness or chilling. Dry atmospheric conditions. Excessive noise, intermittent. Dust. Solvents. Solvents (decreasing agents). Grease and oils. Radiant energy. Electrical energy. Slippery or uneven walking surface. Working around machinery with moving parts. Working around moving objects or vehicles. Working on ladders or scaffolding. Vibration. Working closely with others. Working alone. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.

Evaluations

Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment. The resume/documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job. APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume. This is an Air Reserve Technician (ART) position. ARTs are eligible for 15 days active duty tour each year for which military leave is granted with full civilian pay. Air Reserve units and members; are subject to immediate call to active duty in mobilization to meet a national emergency. For additional information regarding ART positions and/or military qualifications, please call 1-800-257-1212. Retired military are usually ineligible for membership in the AF Reserve. Retired military that have active AF Reserve assignments may apply provided they show assignment (position) on the application. A military service member's statement of service/certification will be accepted IF a terminal leave form or DD214 cannot be provided. The statement/certification should indicate member's separation from active duty is within 120 days of the closing date of this announcement. It must be signed by, or by direction of, the adjutant, personnel officer, or commander of your unit or higher headquarters and must indicate when your terminal leave will begin, your rank, dates of active duty service, the type of discharge and character of service (i.e. honorable). Your preference and/or appointment eligibility will be verified prior to appointment. Military members may be appointed before the effective date of their military retirement/separation if member is on terminal leave.