Job summary

Serves as the General Engineer in a Defense Commissary Agency (DeCA) location. The primary purpose of this position is to serve as an Engineering Specialist in the Logistics and Engineering Group, Facilities Sustainment Division, providing maintenance and repair solutions for facility deficiencies.

Major duties

Serves as DeCA consultant to interpret and supply advise on construction, maintenance or repair policies and regulations Provides technical expertise and consulting services to DeCA staff; commissary store managers and base/installation engineering personnel on all engineering matters related to the maintenance, repair and construction of commissary facilities Provides support to Agency planning, project programming, design and construction activities for DoD commissaries Prepares or monitors the preparation of draft and final, project scope, preliminary cost estimates, and statements of work for Maintenance Contracts Serves as Chief lnspector to monitor contractor performance on facility maintenance or repair contracts. Read the entire announcement before starting the application process.

Qualification

See the Group Coverage Qualification Standards for Professional and Scientific Positions: To qualify for this position you must possess One year of specialized experience equivalent to the GS-12 grade level. To be creditable, specialized experience must be at the GS-12 or equivalent under other pay systems in the Federal service, military, or private sector. Examples of qualifying specialized experience: Providing project management and professional engineering services to include project planning, programming, and design. Troubleshooting of various types of complex facilities maintenance and repair issues. Acting as project manager on major or minor construction. Managing, supervising or performing planning, designing, constructing and/or maintaining structures and facilities. Recommending facility changes, which will enhance functional or operational facets, such as ensuring operational continuity for retail facilities during construction or facilities improvement projects. AND The Individual Occupation Requirements, https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/general-engineering-series-0801/: A. Degree: Engineering: To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) You will receive credit for all relevant qualifying experience (paid and unpaid), including volunteer work done through National Service program (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Additional Requirements that must be met by the closing date: Physical requirements: Physical requirements: Will be required to crawl over, stoop and bend, under and through buildings while inspecting facility systems. Time-in-grade applies to the promotion of current and former federal employees who hold or have held a permanent GS position in either the competitive or excepted service in the previous 52 weeks. Your application package must contain proof you meet this requirement. See Required Documents for more information. For GS-13: You must have 52 weeks of Federal service at or equivalent to GS-12. Time after competitive appointment. Current federal civilian employees must have completed at least 90 days of federal civilian service since being selected for a non temporary appointment from a competitive examination register of eligibles (an announcement opened to the public) or under a direct hire authority. As part of the online application process, you will respond to a series of questions designed to evaluate your level of experience in these competencies: Communications Facilities Engineering General Engineering Individual Occupational Requirement Minimum Qualifications GS-13 Overtime: Occasional Fair Labor Standards Act (FLSA): Exempt Bargaining Unit Status: Not Covered Those retired under CSRS or FERS considered: No. DoD criteria not met. Work environment: Work is performed in an office environment and on construction sites with recurring exposure to moderate discomforts, such as high level of noise, adverse weather and risk due to on going maintenance and construction activities, inspections and climbing at high levels, etc. Telework eligible: Yes - as determined by the agency policy Remote work eligible: No

Education

ARE YOU USING YOUR EDUCATION TO QUALIFY? You MUST provide transcripts and/or other documentation to support your educational claims. Transcripts. REQUIRED when using education to meet qualifications or when education is required. Foreign education may be qualifying if a private organization specializing in interpreting foreign education programs has deemed the foreign education equivalent to that gained in an accredited U.S. education program or a U.S. accredited college or university has given full credit for the foreign courses. Unofficial transcripts from U.S. Department of Education accredited colleges, universities, schools, or institutions listing your name, the name of the school, the date and degree awarded, and the list of classes and credits earned are acceptable for the application process. If selected, official transcripts are required before a firm job offer is made. A photocopy of your degree/diploma is not acceptable. When relying on foreign education, submit transcripts and a copy of the equivalency evaluation results letter with a course-by-course listing. Documents must be in English or include an English translation. The hiring employer for this position does not evaluate degrees from foreign colleges or universities.

Evaluations

HR reviews your resume and supporting documents to determine if you meet the qualifications and requirements, and to determine if you meet the eligibility/eligibilities you selected. Your questionnaire score is a preliminary measure of how well your background matches the competencies. If you submit multiple resumes, the last one received is used for this evaluation and sent to the hiring manager if you are referred for selection consideration. At a minimum, your resume MUST contain your name, address, and contact information, and the following for each listed job experience: Job title; Series and grade, if it is a federal civilian position; Employer's name and address; Employment beginning and ending dates (Month/Year); Number of hours worked per week, and Description of duties performed. DO NOT send a list of competencies or skills in place of a description of the duties performed. HR refers qualified and appointable applicants to the hiring manager for selection consideration In accordance with DeCA's Merit Promotion Plan. Selections are subject to restrictions of the DoD referral system for displaced employees. Interagency Career Transition Assistance Program (ICTAP):This program applies to employees who have been involuntarily separated from a Federal service position within the competitive service or Federal service employees whose positions have been deemed surplus or no longer needed. To receive selection priority for this position, you must: 1) meet ICTAP eligibility criteria AND 2) be rated well-qualified for the position AND 3) submit the appropriate documentation to support your ICTAP eligibility. Well-qualified means you possess the type and quality of experience that exceeds the position's minimum qualifications. Priority Placement Program (PPP) DoD Retained Grade Preference (RGP): To receive this preference, you must choose to apply using the (RGP) eligibility. If you are claiming RGP and are determined to be Well Qualified (score of 85 or above) for the position, you will be referred to the hiring manager as a priority applicant. Priority Placement Program, DoD Military Spouse Preference (MSP) (PPP MSP): In order to receive this preference, you must choose to apply using the(MSP) (PPP MSP) eligibility. If you are claiming MSP (PPP MSP) and are determined to be Well Qualified (score of 85 or above) for the position, you will be referred to the hiring manager as a priority applicant. Appointment Eligibility Criteria. You choose how you wish to be considered for this position by selecting one or more of the eligibilities listed in the Assessment Questionnaire AND providing the supporting documents for the selected eligibility/eligibilities. Required documents are listed in the eligibility description. You are responsible for providing the documents required to prove you can be considered for the selected eligibility/eligibilities. HR does not select or change your eligibility/eligibilities for you, regardless of the supporting documents you submit. You are considered ONLY for the eligibility or eligibilities you select and for which you provide all required supporting documents. You will not be considered if you do not select an eligibility. If you have questions about which eligibility/eligibilities apply to you, contact the HR POC listed on this announcement.