Job summary

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a Environmental Engineer (Title 32) (Indefinite), Position Description Number D2115000 and is part of the VA 203 CEH SQ, National Guard.

Major duties

As an Environmental Engineer (Title 32), GS-0060-12, you will perform the below duties: Manages a complex, highly technical environmental management and protection program and serves as the installation's single most knowledgeable expert on DoD, AF, ANG, EPA state specific environmental laws and regulations. Environmental Management duties and responsibilities include, but are not limited to: (1) Hazardous Waste Management; (2) Storm Water Management and Control; (3) Air Quality; (4) Water Quality; (5) Pollution Prevention; (6) Green Procurement; (7) Environmental Restoration Program (ERP); (8) Cultural and Natural Resources Management; (9) Spill Prevention and Response; (10) Environmental Management System; (11) Environmental Impact Analysis Program (EIAP) Management; and (12) Qualified Recycling Program Management. Manages the entire Planning, Programming, Budget and Execution (PPB&E) for the installation's environmental quality (EQ) program area. Additional budgetary responsibilities may include working with the Defense Logistics Agency (DLA) Energy and Environment for recurring environmental costs related to DLA owned fuel systems. Provides financial analysis and planning for Environmental resource requirements, to include planning, programming and execution. Plans, budgets, and reports environmental financial information regarding the environmental programs through directed financial databases. Manages Environmental Planning aspects of the program. (a) Prepares and guides implementation of environmental program plans. Environmental program plans include, but are not limited to (1) Spill Prevention Control and Countermeasures (SPCC) Plan; (2) Storm Water Pollution Prevention Plan (SWPPP); (3) Hazardous Waste Management Plan (HWMP); (4) Air Emissions Inventory (AEI); (5) Green Procurement Plan (GPP); (6) Integrated Pest Management Plan; (7) Refrigerant Management Plan; (8) Cultural or Natural Resources Management Plans; (9) Environmental Management System (EMS) Plans; and (10) Integrated Solid Waste Management Plan. (b) Serves as an active member of the installation Design Working Group (DWG) and/or Facilities Utilization Board (FUB) accomplishing short term and long-range planning in conjunction with Civil Engineering for future military construction and renovation projects. Responsible for ensuring all necessary environmental permits for related construction projects are obtained and necessary plans developed and implemented. (c) In accordance with the Environmental Impact Analysis Process (EIAP) statutory requirements, the incumbent is responsible for evaluating the environmental impact of construction and renovation projects. Facilitates the decision-making process ensuring due consideration is given to the natural environment, social, political, economic, and governance factors and provides a holistic framework designed for the achievement of sustainable outcomes. Performs other duties as assigned.

Qualification

NOTE: Qualifications are based on breadth/level of experience. In addition to describing duties performed, applicants must provide the exact dates of each period of employment (from MM/DD/YY to MM/DD/YY) and the number of hours worked per week if part time. As qualification determinations cannot be made when resumes do not include the required information, failure to provide this information may result in disqualification. Applicants are encouraged to use the USAJOBS Resume Builder to develop their federal resume. NOTE: This position is being advertised as an indefinite appointment and applicant selected may be released at any time subject to a 30-day notice and advised of his/her rights and benefits to which entitled. In the event a permanent employee is accepted for this indefinite position, there will be a change in their tenure from permanent to indefinite. Indefinite appointments may be made permanent at a later date without competition. WHO CAN APPLY: GROUP I - All qualified Male/Female Commissioned Officer (O1/2nd Lt - O3-Capt) employed (permanent) in the Virginia Air National Guard Military Technician Program. GROUP II - All qualified Virginia Air National Guard Male/Female Commissioned Officer (O1/2nd Lt - O3-Capt) regardless of employment status (Traditional, Military Technician or AGR). To be considered as a Group II applicant, proof of appointment/enlistment in the Virginia National Guard must be attached if the appointment/enlistment occurred within 60 days prior to, or during, the advertisement period. GROUP III - Individuals eligible for membership in the Virginia Air National Guard. Military Grades: Commissioned Officer (O1/2nd Lt - O3-Capt) GENERAL EXPERIENCE: Applicant must have experience serving as the single point of contact for the initiation, development, and execution of all environmental activities and development of regulatory guidance for an installation and its immediate geographic region, with a collaborative influence extending to a broader area. SPECIALIZED EXPERIENCE: Applicant must have at least 12 months of specialized experience, equivalent to at least the GS-11 level, or equivalent pay band in other pay systems in the Federal government? This experience may also have been obtained in the private sector but must demonstrate that it is comparable to the GS grade indicated. This experience must include activities such as: Experience managing a complex, highly technical environmental management and protection program and serving as the installation's single most knowledgeable expert. Experience managing the entire Planning, Programming, Budget and Execution (PPB&E) for the installation's environmental quality (EQ) program area. Experience Manages Environmental Planning aspects of the program. Experience preparing and guiding implementation of environmental program plans.

Education

Basic Requirements: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.

Evaluations

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration. Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):