Job summary

This position is with the Sacramento District, Engineering Division, Dam Safety Production Center and can be filled in any of the following locations: Sacramento, CA San Francisco, CA Los Angeles, CA Albuquerque, NM

Major duties

Serve as a national specialist and principal advisor as a structural engineer for the South Pacific Division Dam Safety Modification Center and all its related products. Plan, program, direct, coordinate, advise, and review the work of lower graded technical specialists in the development of Center-related products and services. Serve as structural engineer lead or primary engineering lead for domestic and international dam safety modification work. Develop highest complexity structural engineer designs and analysis for dam safety modifications, concrete dams, outlet works, tunnels, gates, rock anchor design, seismic, instrumentation, etc. Provide expert level structural engineer input for dam safety risk assessments, potential failure modes analyses, etc. Produce dam safety modification reports, design documentation reports, and construction contract plans and specifications. Develop AE design contracts and construction plans and specifications.

Qualification

Applicants will be referred periodically throughout the open period. Final application disposition will be completed once all positions have been filled or the announcement reaches the end of the open period as stated above. Applications will expire 90 days after submission. To remain eligible for consideration, reapplying is required every 90 days. Who May Apply: US Citizens In order to qualify, you must meet the education AND experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Civil Engineering: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you MUST also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes structural engineering design and analysis to address dam safety deficiencies associated with earth, rockfill, concrete gravity and arch dams and other structures (hydraulic steel structures, outlet works, tunnels, drainage/uplift, rock anchor design, walls and chutes, etc.); design and analysis, including numerical modeling, stability and stress analyses and seismic loadings; conducting dam safety risk analyses. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-13). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you MUST meet the qualification requirement using experience alone--no substitution of education for experience is permitted. Selective Placement Factor: This position requires the possession of a current Professional Engineer license, issued by any State in the United States, the District of Columbia, Guam, or Puerto Rico.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Evaluations

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility. You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation. Basis for Rating: Direct Hire Authority (DHA) for Certain Personnel of the DoD Workforce is open to all U.S. Citizens. The category rating, veterans preference and traditional rating and ranking of applicants does not apply to this vacancy.